想要更直观地了解【【茂名】【当地】软管泵,路沿石成型机现货充足量大优惠】产品吗？？产品视频，带你走进产品世界
以下是:【【茂名】【当地】软管泵,路沿石成型机现货充足量大优惠】的图文介绍
RGB系列软管泵（又称蠕动泵）是通过滚轮或者滑块挤压胶管来工作的。泵可以干转，自吸以及处理高粘度、高磨损介质。泵体无须密封，完全无泄漏，并且每次旋转都能输出固定流量的容积泵，具有转速低、无噪音等特点，用途较为广泛，应用于冶金、稀土、脱硫环保、水处理、造纸、油漆、钛 、复合肥等行业。豫致诚机械生产的工业软管泵有单管和双管两种形式，可作为清池自吸泵、压滤机泵、泥浆泵使用。
在发达 ，垃圾焚烧电厂的渗滤液处理已普遍采用了回喷焚烧技术。这种技术的主要优点包括：
1、可充分分解处理垃圾渗滤液，或者进一步处理其他处理方式产生的浓缩液，避免二次污染；
2、建造、运营、维护成本低，自动控制程度高，操作方便；
3、由于采用雾化喷射，使渗滤液在炉膛内均匀蒸发，保证了燃烧工况，不会对电厂。
软管泵工作原理：
一根内壁光滑，强度可靠的特制橡胶软管安装在泵体内部，通过一对压辊沿着软管旋转挤压，这样的 旋转使得介质往一个方向输送而不会倒流，软管在输送介质之后，由被压扁软管的自身弹性和侧导轮的强制下，软管恢复原状，此时，软管内产生高真空将介质再次吸入管腔，然后介质在随之而来的压辊挤压下从软管内排出，如此周而复始，介质不断的被吸入和排出。目前产品使用温度为≤100℃。根据用户需要可以开发使用温度在120℃的软管泵软管产品。
Working principle of hose pump:
A special rubber hose with a smooth inner wall and reliable strength is installed inside the pump body. It is rotated and squeezed along the hose by a pair of pressure rollers. This rotation allows the medium to be transported in one direction without flowing back. After that, due to the elasticity of the flattened hose and the force of the side guide wheels, the hose returns to its original state. At this time, a high vacuum is generated in the hose to suck the medium into the lumen again, and then the medium is pressed by the subsequent pressure roller. It is discharged from the hose under the squeeze, and so on and on, the medium is continuously sucked in and discharged. The current product temperature is ≤100 ℃. According to user needs, we can develop hose pump hose products with a temperature of 120 ℃.
豫信致诚机械设备有限公司配有标准的 茂名滑模机中心质检室，质检员经过专业检测中心培训，采用先进的 茂名滑模机检验设备，对 茂名滑模机产品的各项技术指标做出准确的分析，确保产品质量稳定、高效。
单管软管泵特点:
动力消耗少，可精确计量输出；易损件少，更换时间短；独特无密封结构，不会产生泄露；自吸能力强，可达8米；可正反向运转，具有自清理能力；压轴采用滚动摩擦，泵腔无需加油；结构简单，操作维修方便；出口压力 可达1.6Mpa；输送高粘度、高固含量、固体颗粒、纤维物质、及其他杂志等液物料，不会产生任何堵塞。
Single tube hose pump features:
Less power consumption, accurate metering output; less wearing parts, short replacement time; unique non-sealed structure, no leakage; strong self-priming ability, up to 8 meters; can run forward and reverse, with self-cleaning ability; final shaft Rolling friction, no need to refuel the pump cavity; simple structure, convenient operation and maintenance; outlet pressure up to 1.6Mpa; conveying high viscosity, high solid content, solid particles, fibrous material, and other magazines and other liquid materials, without any blockage .
扫一扫
